lifting slings and shackles

Literally speaking, lifting slings and shackles are very helpful tools that assist you to load a single type of non-palatalized cargo securely. Basically, a sling is made up of a rope or chain and a cross-strap to secure the cargo at both ends. The rope or chain is usually laced through the eye of the sling and the cross-strap is usually fastened around your waist. Thus, these are basically called as back-up lanyards. On the other hand, back-up chains and double-rope slings are used in lifting operations and are secured by fastening the chain at both ends to a specific point on the crane deck. As the name implies, double-ropes slings are used when the operations require the lifting of heavier loads than that of the single-ropes design. Meanwhile, pole and pike pole slings are used when the load is light enough that pole and pike pole designs can be used. Both designs are ideal for carrying cargo over narrow channels and bridges. However, when carrying heavy loads, single-ropes slings are used and pole and pike pole slings are used when the load is light enough. So in this article we will discuss some differences and similarities slings and shackles.

Differences- It should be noted that both lifting slings and shackles have a distinct difference in terms of lifting force and handling capacity. Lifting capacity refers to the force with which the lifting rope exerts when it is pulled up and released. On the other hand, handling capacity is measured using an acceptable level of force for the user to operate the device. For instance, a loader can be operated using a handle force of five hundred pounds. In the case of lifting slings, the operator would need to apply four hundred pounds of force to move the load.

Similarities- When comparing lifting and handling capability, the similarity ends here. Both chain slings and handrails have a limited ability to carry cargo. This limitation is generally defined by the distance between the first point of attachment and the center of the device. However, the difference between the two devices lies in the manner in which they are used. While a chain sling is operated using hand and leg power, the shackles, on the other hand, use the engine power for lifting and lowering. It is observed that chain slings are used in applications where heavy loads are required whereas the recovery slings are used for carrying lighter loads.

Certifications- The ability of the lifting slings and hand signals is evaluated based on the standard test standards set by the American Society for Testing and Materials (ASTM). The test results are provided to the manufacturers, so that they can ensure the strength of their product by rebuilding them if found defective. If you want to improve the performance of your lifting slings or hand signals, then the ability of the devices should be improved as well. As far as possible, manufacturers should seek the help of professionals, who are familiar with the functionality and installation of the lifting slings and hand signals. Only professionals can assess the lifting slings and hand signals condition of the vehicles in a professional manner. Once this is done, then only the necessary corrective actions can be taken and there are many organizations in the market like and many more who have all the necessary certifications for providing these types of services. So always check all the necessary certification before taking any types of service and regarding this type of information you can always go online.

By Mike

Leave a Reply

Your email address will not be published.